Structural Attachments
Showing 1–10 of 17 results
Adjustable Q-Deck Insert
Figure: 885
Function
Designed for installation in metal concrete deck forms to provide a means to support piping and equipment.
Welded Beam Attachments
Figure: 900 & 900-1
Function
Designed for attaching hanger rod to the bottom flange of a beam. If installed in the inverted position, the hanger rod can be vertically adjusted otherwise bolt and nut are required.
Concrete Rod Attachment Plate
Figure: 903
Function
Designed for attaching hanger rod to a concrete ceiling.
Concrete Clevis Plate
Figure: 904
Function
Designed for use as a structural attachment to a concrete ceiling. Normally used in conjunction with Fig. 35 weldless eye nut or Fig. 55 welded eye rod.
Side Beam Connector
Figure: 905
Function
Designed for attaching hanger rod to the side of wooden beams or walls. Normally secured in place with Fig. 48 wood drive screw.
Steel Side Beam Connector
Figure: 906
Function
Designed for attaching hanger rod to wood structures. Secured with Fig. 45 lag screw or two Fig. 48 wood drive screws, see chart.
Reversible Angle Bracket
Figure: 910
Function
Designed to support pipe at various distances from a wall or column.
Side Beam Angle Bracket
Figure: 920
Function
Designed for use with wood, concrete, or steel beams to provide a means for supporting hanger rod. When used on steel beams Fig. 920 can be welded or bolted in place.
Reversible Side Beam Angle Bracket
Figure: 925
Function
Designed for attaching hanger rod to the side of beams or walls. Fig. 925 can accommodate either 3/8” or 1/2” rod.