Pipe Clamps
Showing 1–10 of 15 results
Standard Pipe Clamps
Figure: 520 & 521
Function
Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod attachment.
Heavy Duty Pipe Clamp
Figure: 522
Function
Designed to be used in the suspension of non-insulated pipe lines where heavier loads are to be suspended. Normally used in conjunction with Fig. 35 weldless eye nut or Fig. 55 welded eye rod to allow flexibility at the rod attachment.
Double Bolt Pipe Clamp
Figure: 525
Function
Designed for the suspension of high temperature insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut or Fig. 55 welded eye rod to allow flexibility at the rod attachment. The clamp can be used with up to 4 inches (101.6mm) of insulation and temperatures up to 750° F (399° C).
Heavy Duty Double Bolt Pipe Clamp
Figure: 526
Function
Designed for the suspension of high temperature pipe lines. The increased material and bolt sizes allow Fig. 526 to be used in applications where heavier loads will be encountered. Normally used in conjunction with Fig. 35 weldless eye nut or Fig. 55 welded eye rod to allow flexibility at the rod attachment. The clamp can be used with up to 4 inches (101.6) of insulation and temperatures up to 750° F (399° C).
Riser Clamps
Figure: 550, 551, & 553
Function
Designed for supporting and stabilizing vertical pipe runs. The PVC coating on Fig. 553 protects the pipe from the metal surface of the clamp. This product is not intended for use with hanger rods. Clamp is designed for standard iron pipe O.D. and must be considered when sizing other types of piping.
Copper Tubing Riser Clamps
Figure: 552 & 554
Function
Designed for supporting and stabilizing vertical tubing runs. The PVC coating on Fig. 554 protects the tube from the metal surface of the clamp.
Two Bolt Underground Pipe Clamp
Figure: 580
Function
Designed for clamping the caulked joints of underground A.W.W.A. ductile iron water pipes to prevent separation of joints.
Washer For Fig. 580
Figure: 585
Function
Designed to secure tie rods when used in conjunction with Fig. 580 two bolt underground pipe clamp.
Four Bolt Underground Pipe Clamp
Figure: 590
Function
Designed for clamping the caulked joints of underground A.W.W.A. ductile iron water pipe lines to prevent separation of joints.
Washer For Fig. 590
Figure: 595
Function
Designed to secure tie rods when used in conjunction with Fig. 590 four bolt underground pipe clamp.