CPVC Straps
Showing all 4 results
CPVC Two-Hole Pipe Strap
Figure: 070
Function
Designed to support CPVC pipe horizontally from the side or bottom of beam. Fig. 070 can only be used as a guide on top of beam or on vertical piping. Fig. 070 also acts as a restrainer to prevent the thrust of a sprinkler head during activation when mounted on top of structure. Fig. 070 may be installed onto wood using supplied fasteners or into, minimum 20 gauge, steel using two 1/4” X 1” tek type screws (not included). Features flared edges to protect piping as it slides through the installed fitting and retaining dimples to allow for easy installation onto pipe.
CPVC One-Hole Wrap Around
Figure: 075
Function
Designed to support CPVC pipe horizontally from the side of a beam. Fig. 075 must be installed with the mounting tab oriented over top of piping on the side of a beam. Fig. 075 can only be used as a guide on top of beam or on vertical piping. Fig. 075 may be installed onto wood using supplied fasteners or into, minimum 20 gauge, steel using one 1/4” X 1” tek type screw (not included). Features flared edges to protect piping as it slides through the installed fitting.
CPVC Two-Hole Stand Off Strap
Figure: 076
Function
Designed to support CPVC pipe horizontally from the side or bottom of beam, or composite wood joists with a minimum of 3/8” web thickness. Fig. 076 can only be used as a guide on top of beam or on vertical piping. Fig. 076 may be installed onto wood using supplied fasteners. Intended for attachment to concrete, steel structural members, and sheet metal, with fasteners and fastening methods that comply with NFPA13 requirements. Features flared edges to protect piping as it slides through the installed fitting.
CPVC Two-Hole Side Mount Strap
Figure: 077
Function
Designed to support CPVC pipe horizontally from the side or bottom of beam. Fig. 077 can only be used as a guide on top of beam or on vertical piping. Fig. 077 also acts as a restrainer to prevent the thrust of a sprinkler head during activation when mounted on top of structure. Fig. 077 may be installed onto wood using supplied fasteners or into, minimum 20 gauge, steel using two 1/4” X 1” tek type screws (not included). Features flared edges to protect piping and retaining dimples to allow for easy installation onto pipe.