Pipe Clamps & Riser Clamps

Showing 1–10 of 12 results

Copper Tubing Riser Clamps

Figure: 552 & 554

Function

Designed for supporting and stabilizing vertical tubing runs. The PVC coating on Fig. 554 protects the tube from the metal surface of the clamp.

Double Bolt Pipe Clamp

Figure: 525

Function

Designed for the suspension of high temperature insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut or Fig. 55 welded eye rod to allow flexibility at the rod attachment. The clamp can be used with up to 4 inches of insulation and temperatures up to 750° F.

Extended Pipe Clamp (DISCONTINUED)

Figure: 545

Function

Designed to be used in the suspension or support of pipe lines where exact distance between the structure and the pipe is unknown until time of installation.

Four Bolt Underground Pipe Clamp

Figure: 590

Function

Designed for clamping the caulked joints of underground A.W.W.A. ductile iron water pipe lines to prevent separation of joints.

Heavy Duty Double Bolt Pipe Clamp

Figure: 526

Function

Designed for the suspension of high temperature pipe lines. The increased material and bolt sizes allow Fig. 526 to be used in applications where heavier loads will be encountered. Normally used in conjunction with Fig. 35 weldless eye nut or Fig. 55 welded eye rod to allow flexibility at the rod attachment. The clamp can be used with up to 4 inches of insulation and temperatures up to 750° F.

Heavy Duty Pipe Clamp

Figure: 522

Function

Designed to be used in the suspension of non-insulated pipe lines where heavier loads are to be suspended. Normally used in conjunction with Fig. 35 weldless eye nut or Fig. 55 welded eye rod to allow flexibility at the rod attachment.

Offset Pipe Clamp (DISCONTINUED)

Figure: 535

Function

Designed to be used in the clamping of pipe lines at a fixed distance away from the floor or wall.

Riser Clamps

Figure: 550, 551, & 553

Function

Designed for supporting and stabilizing vertical pipe runs. The PVC coating on Fig. 553 protects the pipe from the metal surface of the clamp. This product is not intended for use with hanger rods. Clamp is designed for standard iron pipe O.D. and must be considered when sizing other types of piping.

Standard Pipe Clamps

Figure: 520 & 521

Function

Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod attachment.

Two Bolt Underground Pipe Clamp

Figure: 580

Function

Designed for clamping the caulked joints of underground A.W.W.A. ductile iron water pipes to prevent separation of joints.