Clevis Hangers

Showing 1–10 of 13 results

Clevis Hangers

Figure: 420, 425, 426, 430, 440, 440F, 441, 442, 450, 450F, 450T, 450V, 451, 451F, 453, 454, 455, 456, 970, 970F, 973, & 703025-708362

Function

Designed for the suspension of stationary pipe lines.

A.W.W.A. Clevis Hanger

Figure: 420

Function

Designed for the suspension of stationary (A.W.W.A.) ductile iron and cast iron pipe.

Stainless Steel Clevis Hanger

Figure: 425 & 426

Function

Designed for the suspension of non-insulated stationary pipe lines in applications where protection from corrosive environments is desired. Frequently specified for areas requiring the ultimate in sanitation. Another benefit includes a reduction of long term maintenance costs, due to the corrosive resistant properties of stainless steel.

Clevis Hanger For Insulated Pipe Lines

Figure: 430

Function

Designed for the suspension of insulated stationary pipe lines. The elongated design permits the insulation to encompass the hanger, while maintaining a clearance between the insulation and the cross bolt. This allows the installation of the insulation to be more economical due to the fact that less cutting and fitting is required.

Light Duty Clevis Hangers

Figure: 440, 440F, & 441

Function

Designed for the suspension of non-insulated stationary pipe lines in light duty applications. Fig. 440F has a layer of felt which helps to reduce sound and vibration.

Copper Tubing Clevis Hangers

Figure: 442

Function

Designed for the suspension of non-insulated stationary copper tubing.

Standard Clevis Hangers

Figure: 450, 450F, 451, 451F, 453, & 454

Function

Designed for the suspension of non-insulated stationary pipe lines. Fig. 450F has a layer of felt which separates the pipe from the hanger to reduce vibration and sound. The PVC coating on Fig. 453 protects the pipe from the metal surface of the hanger.

Plastic Pipe Clevis Hanger

Figure: 450V

Function

Designed for the suspension of flexible plastic pipe lines. Used in conjunction with Fig. 450T.

Plastic Pipe Support Trough

Figure: 450T

Function

Designed for use with Fig. 450V as a support for plastic or other flexible pipe systems. Hangers should be placed as close to the trough joints as possible.

Clevis With Secured Insulation Shield

Figure: 455 & 456

Function

Designed for the suspension of stationary insulated pipe lines. Fig. 455 is a combination of our Fig. 160 shield welded to a Fig. 450 or Fig. 451 clevis hanger which ensures that the shield will be installed in conjunction with the hanger. The shield is furnished with flared ends to prevent it from cutting into the insulation.