Search Results for ""

Light Duty U-Bolt

Ordering: Specify figure number, pipe size, material, and finish. If nuts are required, order Fig. 110 separately. NOTE: Regularly furnished without nuts unless specified otherwise. View Data Sheet

Technical Data

General Download Full General Technical Data Material Specifications Finishes Corrosion Channels: American Standard I-Beams: American Standard Wide Flange I-Beams Steel Pipe Data Spacing of Hangers for Steel Pipe Copper Tube Data Spacing of Hangers for Copper Tubing AWWA Ductile Iron Pipe Data Glass Pipe Data PVC Plastic Pipe Data Spacing of Hangers for PVC Plastic

Adjustable In-Rack Flue Hanger

Size:             3/8” rod Install: Loosen rod coupling so the device can expand.  Place compressed product in the rack flue space.  Expand device inserting the support rivets into rack columns.  Once fully expanded, pull device down securing it into the rack columns ensuring spring clips snap in engaging the rack column.  Adjust the rod coupling

Single In-Rack Flue Hanger

Size:             3/8” rod Install:          Insert the support rivets into rack columns.  Pull device down securing it into the rack columns ensuring spring clip snaps in engaging the rack column.  Adjust the strut nut to the desired position then insert threaded rod until it fully engages into the strut nut. Ordering: Specify figure number.

Steel Ceiling Plate

Approvals: Underwriters’ Laboratories Listed in the U.S. (UL) and Canada (CUL) for supporting up to 2” (50) pipe max. (Fig. 945 only) Ordering: Specify figure number. View Data Sheet

Rod Swivel Attachment

Size: 3/8” Install: Insert a #2 screwdriver through the tapped hole to access the head of attachment fastener. Tighten attachment fastener to desired attachment point, then remove screwdriver and thread 3/8-16 threaded rod into Fig. 020. Approvals: Underwriters’ Laboratories Listed in the U.S. (UL) and Canada (CUL). Ordering: Specify figure number. View Data Sheet

Side Beam Angle Bracket

Approvals: Complies with Federal Specification A-A-1192A (Type 34) and Manufacturers’ Standardization Society ANSI/MSS SP-58 (Type 34) which supersedes ANSI/MSS SP-69. Ordering: Specify figure number, rod size, material, and finish. View Data Sheet

Turnbuckle

Approvals:   Complies with Federal Specification A-A-1192A (Type 13) and Manufacturers’ Standardization Society ANSI/MSS SP-58 (Type 13) which supersedes ANSI/MSS SP-69. Ordering: Specify figure number, rod size, and finish. NOTE: Openings of 3″  (76.2), 9″  (228.6) and 12″  (304.8) are available upon request. View Data Sheet

Square Plate Washer

Ordering:     Specify figure number, rod size, material, and finish. View Data Sheet